Bi-metal M 42
Universal saw blade suitable for cutting of a wide range of materials including tool steel and stainless steel up to the hardness of 45 HRC. The teeth are made of HSS-M42 steel with cobalt content.
Maxtech 420 / constant toothing
Characteristics:
tooth tips made of HSS M42 1.3247 ● standard tooth with zero or slightly positive tooth face angle and standard, or corrugated setting ● excellent for cutting of materials with short chips as well as thin-walled materials ● clean and smooth cut.
Use:
- common types of steel
- up to tensile strength of approx. 1400 N/mm2
- non-ferrous metals
- material cross-section up to 1000 mm
- shape cutting on vertical machines.
| Number of teeth per inch | |||||
|---|---|---|---|---|---|
| [mm] | 4 | 6 | 10 | 14 | 18 |
| 13 x 0,65 | N | N | N | ||
| 13 x 0,9 | N | N | |||
| 20 x 0,9 | N | N | N | ||
| 27 x 0,9 | N | N | N | ||
N = standard tooth shape
Maxtech 421 / constant toothing
Characteristics:
tooth tips made of HSS M42 1.3247 ● tooth with positive tooth face angle and standard setting easily penetrates into the material can perfectly create chip in materials with larger diameters ● cuts easily tough materials and materials with long chips ● cuts smoothly and accurately.
Use:
- common types of steel up to tensile strength of approx. 1400 N/mm2
- non-ferrous metals
- material cross-sections over 100 mm.
| Number of teeth per inch | ||||
|---|---|---|---|---|
| [mm] | 2 | 3 | 4 | 6 |
| 13 x 0,65 | H | H | ||
| 13 x 0,9 | H | H | H | |
| 20 x 0,9 | H | H | ||
| 27 x 0,9 | H | H | ||
H = hooked tooth shape
Maxtech 430 (400) / variable toothing
Characteristics:
tooth tips made of HSS M42 1.3247 ● variable tooth with tooth face angle of 0° and a special group setting ● trouble-free cutting short-chipping materials ● long service life and low cutting costs.
Use:
- common types of steel up to tensile strength of approx. 1400 N/mm2
- sections of non-ferrous metals
- cutting of individual pieces as well as bundles
- tubes and sections with little or medium wall thickness
- sheets on vertical machines.
| Number of teeth per inch | ||||||
|---|---|---|---|---|---|---|
| [mm] | 3/4 | 4/6 | 5/8 | 6/10 | 8/12 | 10/14 |
| 13 x 0,65 | V-0 | V-0 | V-0 | V-0 | ||
| 13 x 0,9 | V-0 | V-0 | V-0 | |||
| 20 x 0,9 | V-0 | V-0 | V-0 | V-0 | ||
| 27 x 0,9 | V-0 | V-0 | V-0 | V-0 | V-0 | V-0 |
| 34 x 1,1 | V-0 | V-0 | V-0 | V-0 | V-0 | |
| 41 x 1,3 | V-0 | V-0 | V-0 | V-0 | ||
| 54 x 1,6 | V-0 | V-0 | V-0 | |||
V-0 = variable tooth with 0 angle
Maxtech 431 (401) / variable toothing
Characteristics:
tooth tips made of HSS M42 1.3247 ● variable tooth with positive tooth face angle and special group setting, cuts quickly and smoothly full materials as well as thick-walled sections ● long service life and low cutting costs.
Use:
- common types of steel up to tensile strength of approx. 1400 N/mm2
- sections of non-ferrous metals
- cutting of individual pieces as well as bundles
- full materials of medium or large dimensions
- thick-walled tubes.
| Number of teeth per inch | |||||
|---|---|---|---|---|---|
| [mm] | 0,75/1,25 | 1,4/2 | 2/3 | 3/4 | 4/6 |
| 20 x 0,9 | V-POS | ||||
| 27 x 0,9 | V-POS | V-POS | V-POS | ||
| 34 x 1,1 | V-POS | V-POS | V-POS | V-POS | |
| 41 x 1,3 | V-POS | V-POS | V-POS | V-POS | |
| 54 x 1,3 | V-POS | V-POS | V-POS | V-POS | |
| 54 x 1,6 | V-POS | V-POS | V-POS | ||
| 67 x 1,6 | V-POS | V-POS | |||
| 80 x 1,6 | V-POS | V-POS | |||
V-POS = variable tooth with a positive angle
Maxtech 457 (402) / variable toothing
Characteristics:
tooth tips made of HSS M42 1.3247 ● variable tooth with a new HL shape, slightly positive tooth face angle and a special setting ● prevention of pinching in the cut ● reduced vibrations and increased cutting performance ● surface quality and greater durability.
Use:
- for optimum performance on small and medium-sized cutting machines
- common types of steel up to tensile strength of approx. 1400 N/mm2
- cutting of individual pieces as well as bundles
- tubes, sections and beams with any wall thickness
- full material.
| Number of teeth per inch | ||||||
|---|---|---|---|---|---|---|
| [mm] | 2/3 | 3/4 | 4/6 | 5/7 | 8/11 | 12/16 |
| 20 x 0,9 | V-POS | V-POS | V-POS | |||
| 27 x 0,9 | V-POS | V-POS | V-POS | V-POS | V-POS | |
| 34 x 1,1 | V-POS | V-POS | V-POS | V-POS | V-POS | |
| 41 x 1,3 | V-POS | V-POS | V-POS | V-POS | V-POS | |
| 54 x 1,3 | V-POS | V-POS | ||||
| 54 x 1,6 | V-POS | V-POS | V-POS | |||
V-POS = variable tooth with a positive angle
Maxtech 434 / variable toothing
Characteristics:
tooth tips made of HSS M42 1.3247 ● specially designed variable tooth with a particularly positive tooth face angle cuts aggressively tough materials ● reduced cutting forces and easy chip formation ensure precise cutting and durability of the saw blade.
Use:
- long-chip steel materials
- stainless steel
- titanium alloys
- special bronzes
- copper alloys
- nickel-based alloys
- exotic, hard-to-divide alloys
- full material of medium dimensions.
| Number of teeth per inch | |||
|---|---|---|---|
| [mm] | 1,4/2 | 2/3 | 3/4 |
| 29 x 0,9 | V-POS | ||
| 34 x 1,1 | V-POS | V-POS | |
| 41 x 1,3 | V-POS | V-POS | |
| 54 x 1,3 | V-POS | ||
| 54 x 1,6 | V-POS | V-POS | V-POS |
V-POS = variable tooth with a positive angle