ARG 220

Band saw for metal - gravitation

Noncommittal Demand

Machine: ARG 220

Please enter your contact details. We will contact you as soon as possible.


Cancel

We confirm receipt of noncommittal demand

Demanded machine: ARG 220

Company:
Kontaktní osoba:
VAT:
Adresa:
Phone:
E-mail:
Your inquiry:
Destination country:

We will contact you as soon as possible using given contact details.

Back to website

Warning: Inactive model.

We no longer offer this product.

This band saw has been replaced by another model - ARG 235

2600 X 27 X 0,9

A universal band saw is appraised for general use in various workshops (work on locks, maintenance) and at plants with machinery. Industrial band 27 x 0.9 mm is manufactured in many versions and allows for cutting of wide range of mate-rials, including stainless steel or tool steel.

The band saw arm uplift is manual; the feed into cut is carried out by the weight of the arm, with the possibility of continuous regulation by the oil damper butterfly valve. When the cut is finished the band saw drive automatically switches off. To facilitate easy arm uplift the machine is equipped with adjustable tension springs that allow for setting of optimum force required for the arm uplift according to characteristics of the material to be cut.

  • Continuous adjustment of the cutting angle within the range 90°–60° when the workpiece is clamped tight.
  • Very robust machine framework composes of castings from grey cast iron and ensures vibration absorption.
  • Modern concept of the band saw arm allows for large cutting ranges in upright and angular cuts.
  • Simple locking and adjusting of the desired cutting angle on the angle scale.
  • Massive quick-clamping vice ensures easy and reliable material clamping.
  • Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy.
  • Overdesign of running wheel bearings, tensioning wheel system and all rotary parts ensures long service life of the machine.
  • Noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox.
  • Three-phase two-speed motor (400 V) allows for the selection of band speed between 40 and 80 m/min.
  • The machine is connected to a complete cooling system with a high-performance pump and possibility of regulating the flow on both guiding heads independently. Coolant tank with a pump is placed in the base of the machine.
  • Easy control by ergonomically placed controls (electrical and hydraulics) on the base of the machine.
  • A continuously adjustable 250 mm stop is supplied with the machine.
90° +45° +60°
220 170 105
220 160 75
270 x 150 175 x 80 105 x 75

Main motor 400 V, 50 Hz, 0,9/1,4 kW
Pump motor 400 V, 50 Hz, 0,05 kW
Saw blade speed 40/80 m/min.
Working height of vice 900 mm
Cool tank cca 15 l
Machine dimensions (min.) 1430 x 750 x 1420 mm
Machine dimensions (max.) 1780 x 1310 x 1920 mm
Machine weight 250 kg

*) Is always a part of the conveyor. 
​Note: You can connect M280 behind the cut as a conveyor only if angular cutting isn‘t required.

  • Workpiece stop - Standard equipment

    Simple stop for setting the required length of the material to be cut.

  • Material chute KL

    Continuously joins the vice behind the cut and allows for easy slide of cut pieces into a container when cutting larger series. The chute construction consisting of 2 parts prevents leakage of the coolant.

  • Halogen lamp LA

    Provides good lighting of the workplace of the machine. An invaluable tool especially when the lighting at the workplace is insufficient.

  • Oil mist lubrication MM

    Creates an oil mist that is sprayed onto the cutting edge. It replaces the use of a classic coolant, especially when cutting sections during which leakages may occur. Possibility of using organic oils.

  • Saw band tension indicator CD

    Ensures accurate tensioning of the saw band to a required value according to the pressure gauge and its control during the use of the machine. Optimum tensioning of the saw band is essential for its service life and cutting accuracy.

  • A universal band saw is appraised for general use in various workshops (work on locks, maintenance) and at plants with machinery. Industrial band 27 x 0.9 mm is manufactured in many versions and allows for cutting of wide range of mate-rials, including stainless steel or tool steel.

    The band saw arm uplift is manual; the feed into cut is carried out by the weight of the arm, with the possibility of continuous regulation by the oil damper butterfly valve. When the cut is finished the band saw drive automatically switches off. To facilitate easy arm uplift the machine is equipped with adjustable tension springs that allow for setting of optimum force required for the arm uplift according to characteristics of the material to be cut.

    • Continuous adjustment of the cutting angle within the range 90°–60° when the workpiece is clamped tight.
    • Very robust machine framework composes of castings from grey cast iron and ensures vibration absorption.
    • Modern concept of the band saw arm allows for large cutting ranges in upright and angular cuts.
    • Simple locking and adjusting of the desired cutting angle on the angle scale.
    • Massive quick-clamping vice ensures easy and reliable material clamping.
    • Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy.
    • Overdesign of running wheel bearings, tensioning wheel system and all rotary parts ensures long service life of the machine.
    • Noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox.
    • Three-phase two-speed motor (400 V) allows for the selection of band speed between 40 and 80 m/min.
    • The machine is connected to a complete cooling system with a high-performance pump and possibility of regulating the flow on both guiding heads independently. Coolant tank with a pump is placed in the base of the machine.
    • Easy control by ergonomically placed controls (electrical and hydraulics) on the base of the machine.
    • A continuously adjustable 250 mm stop is supplied with the machine.
  • 90° +45° +60°
    220 170 105
    220 160 75
    270 x 150 175 x 80 105 x 75

    Main motor 400 V, 50 Hz, 0,9/1,4 kW
    Pump motor 400 V, 50 Hz, 0,05 kW
    Saw blade speed 40/80 m/min.
    Working height of vice 900 mm
    Cool tank cca 15 l
    Machine dimensions (min.) 1430 x 750 x 1420 mm
    Machine dimensions (max.) 1780 x 1310 x 1920 mm
    Machine weight 250 kg

  • *) Is always a part of the conveyor. 
    ​Note: You can connect M280 behind the cut as a conveyor only if angular cutting isn‘t required.

    • Workpiece stop - Standard equipment

      Simple stop for setting the required length of the material to be cut.

    • Material chute KL

      Continuously joins the vice behind the cut and allows for easy slide of cut pieces into a container when cutting larger series. The chute construction consisting of 2 parts prevents leakage of the coolant.

    • Halogen lamp LA

      Provides good lighting of the workplace of the machine. An invaluable tool especially when the lighting at the workplace is insufficient.

    • Oil mist lubrication MM

      Creates an oil mist that is sprayed onto the cutting edge. It replaces the use of a classic coolant, especially when cutting sections during which leakages may occur. Possibility of using organic oils.

    • Saw band tension indicator CD

      Ensures accurate tensioning of the saw band to a required value according to the pressure gauge and its control during the use of the machine. Optimum tensioning of the saw band is essential for its service life and cutting accuracy.