ARG 105 mobil

Bandsaw for metal - manual
Noncommittal Demand
Offer list pdf

Noncommittal Demand

Machine: ARG 105 mobil

Please enter your contact details. We will contact you as soon as possible.


I agree to the processing of my personal data *

Cancel

We confirm receipt of noncommittal demand

Demanded machine: ARG 105 mobil

Firstname:
Phone:
E-mail:
Your inquiry:
Destination country:

We will contact you as soon as possible using given contact details.

Back to website
1385 x 13 x 0,65

Small portable bandsaw designed for construction sites, installations and workshop production. In order to minimize the total weight the arm, base plate and table are made of cast aluminium. To achieve the maximum service life the vice and wheels of the saw blade are made of grey cast iron. Saw blade feed into cut, arm uplift and material clamping are carried out manually.

  • Modern concept of the bandsaw arm allows for large cutting ranges in upright and angular cuts.
  • Continuous adjustment of the cutting angle within the range 90°–60° when the workpiece is clamped tight.
  • Simple locking and adjusting of the desired cutting angle on the angle scale.
  • Maximum cutting accuracy and saw blade service life in this category of bandsaws.
  • High-precision three-side hardmetal bandsaw guidance.
  • Manufactured bearing of running wheels and tensioning wheel system are the same as in big professional machines.
  • Professional, noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox.
  • The machine is equipped with a 200mm workpiece stop.

All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.

90° +45° +60°
105 70 40
105 65 40
105 x 110 65 x 85 40 x 45

Main motor 230 V, 50 Hz, 0,55 kW
Saw blade speed 55 m/min.
Machine dimensions Dimension drawing
Machine weight 29 kg

  • Workpiece stop - Standard equipment

    Simple stop for setting the required length of the material to be cut.

  • Description

    Small portable bandsaw designed for construction sites, installations and workshop production. In order to minimize the total weight the arm, base plate and table are made of cast aluminium. To achieve the maximum service life the vice and wheels of the saw blade are made of grey cast iron. Saw blade feed into cut, arm uplift and material clamping are carried out manually.

    • Modern concept of the bandsaw arm allows for large cutting ranges in upright and angular cuts.
    • Continuous adjustment of the cutting angle within the range 90°–60° when the workpiece is clamped tight.
    • Simple locking and adjusting of the desired cutting angle on the angle scale.
    • Maximum cutting accuracy and saw blade service life in this category of bandsaws.
    • High-precision three-side hardmetal bandsaw guidance.
    • Manufactured bearing of running wheels and tensioning wheel system are the same as in big professional machines.
    • Professional, noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox.
    • The machine is equipped with a 200mm workpiece stop.

    All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.

  • Technical specification
    90° +45° +60°
    105 70 40
    105 65 40
    105 x 110 65 x 85 40 x 45

    Main motor 230 V, 50 Hz, 0,55 kW
    Saw blade speed 55 m/min.
    Machine dimensions Dimension drawing
    Machine weight 29 kg
  • Accessories

    • Workpiece stop - Standard equipment

      Simple stop for setting the required length of the material to be cut.

  • Videos